Feature
1. The machine has three motivated driving rollers that can avoid sliding during running.
2. The max hydraulic pressure can be reached 20T that brings the easily bending of all kinds of aluminum profile and window sash (rectangular steel tube)
3. All products not only can be formed in once with high efficiency and zero wear rate, but also can be formed in many times.
4. Three rollers are controlled by CNC system with features of smooth moves and high precision. Positional accuracy: +/-0.01mm.
5. Space of driving wheel is set according to user needs. It can be adjusted in different position, in other words, the position of two wheels can be adjusted to different space.
6. It not only can bend into one radius arc (ordinary type C arc), but also two radius arcs (type U arc), and three radius arc (bread arc and ellipse).
7. With the function of intelligent calculation of material spring back amount and compensation, aiming at the same bend radius arc, the machine can calculate the spring back amount automatically that can avoid waste of material and time during forming different kind of arc.
8. The machine can store a certain amount of procedure (depend on memory space), input information as detail as possible for easy recognition during next use.
9. It can bend all kinds of aluminum profile (ordinary aluminum profile, thermal break aluminum, aluminum-plastic-aluminum, aluminum plastic), rectangular steel tube, etc.
10. The horizontal placing of machine can adapt to different kinds of profile in different size and weight.
11. It is flexible operating that can be controlled manually or automatically.
12. Various feeding speed can be adjusted during every procedure, which improves the workpiece quality and meets the requirement of productivity.
13. Mould is simple and useful; it can bend aluminum with radius 250 mm without wrinkles.
Technical Parameter
Minimum bending radius
|
180mm
|
Diameter of roller
|
60mm
|
Working mode
|
NC, hydraulic drive
|
Lower shaft center distance
|
350-750mm
|
Positioning precision of upper roller
|
0.01mm
|
Max.travel route of upper roller
|
280mm
|
Maximum width of profile
|
150*160mm
|
Power of oil pressure motor
|
6 kw
|
Pressure of oil
|
20T
|
Torque
|
2500N.M
|
Working air pressure
|
0.2Mpa
|
Working voltage
|
380V AC/50HZ
|
Dimension (L*W*H)
|
1300*1100*1100mm
|
Weight
|
1000KG
|
Electrical spare parts
1. Japan Mitsubishi control system, 10 inch touching screen, inverter, power switch
2. Numerical proportional flow regulator Back pressure valve adopt Japan YUKEN
3. Schneider contactor, Omron encoder, and China famous grating scale